ZH

The mud recycling system is not only widely used in oil and gas drilling projects, but also widely used in HDD, CBM, TBM and other projects with the increasing attention to environmental protection. Due to the technical requirements of engineering construction, it is necessary to add various chemical agents to the mud to make the performance of the mud meet the requirements of the drilling process, thereby assisting the host to quickly complete various construction work.

Due to these different configurations of the mud recycling system, the Mud Gun is used in the mud tank for high-pressure jet mixing to prevent solid phase precipitation in the corner of the mud tank and the suction ports of each pump. Or used to transport mud.

The number of Mud Gun depends on the size of the mud tank, which is usually installed on the mud pipeline of the mud tank; If there is no dedicated Mud Gun pipeline inside the mud tank, it can also be added on the top or side of the mud tank to ensure the installation and use of mud. According to the size of the inlet port, it is divided into 2-inch Mud Gun and 3-inch Mud Gun; according to structural characteristics, it is divided into fixed Mud Gun.

Gun Diameter: 2 inch(50mm)/3 inch(80mm)
Connection Size:2 inch(50mm)/3 inch(80mm)
Rotation Degree:
Working Pressure: Max. 6.4Mpa
Nozzle Qty: 3 Nozzles
Length: The length is depend on the Height of the Mud Tank

• The structure is optimized and reasonable, and it can adapt to the matching requirements of pumps with different pressures.
• The equipment has good sealing performance, high wear resistance of the nozzle, and strong spraying force, which can clean the mud tank.
• The accessories are selected from well-known brands, which greatly improves the performance and life of the equipment.
• The whole equipment has undergone pickling, assisted plating, hot-dip galvanizing, passivation, and fine grinding, which improves the anti-corrosion performance of the equipment.
• The Mud Gun has good jetting effect and large cleaning area.
• The Mud Gun is simple in structure, flexible in operation and convenient in use.
• The nozzles are available in fixed and rotating types. The three nozzles are designed with an included angle of 120°. Even the stationary Mud Gun can radiate the mud tank in all directions. For the rotating Mud Gun, it can radiate the mud tank without blind spots.
• Long service life of nozzles, the nozzle is made of polyurethane and has a lifespan of up to 2000 hours.
• The length of the gun body can be customized according to actual needs.
• Foldable handle design, convenient and safe.