ZH

Hydro-Cyclones for Solids and Liquid Separation is a popular separation equipment, the working principle is centrifugal settling principle. When the two-phase mixture to be separated enters the cyclone from the periphery at a certain pressure, a strong three-dimensional elliptical strong rotational shear turbulent motion is generated. Due to the particle size difference between coarse and fine particles, they are subjected to different magnitudes of centrifugal force, centripetal buoyancy, fluid drag, and centrifugal settling. Most of the coarse particles are discharged through the bottom outlet of the cyclone, while most of the fine particles are discharged through the overflow pipe, thus achieving the purpose of separation and classification.

Coupling Grooved End Bolt T-Gasket 10″800 Psi
Coupling Grooved End Bolt T-Basket 12″800 Psi
Gauge 0-60 Psi/0-400 Kpa 2-1/2″1/4 Npt Lm
Feed 12″Urethane Clone Vitaulic Type
Clamp Small 12″Clone Urethane
Clamp Large 12″Clone Urethane
Coupling Grooved End Bolt T-Gasket 4″1000 Psi
Coupling,Grooved 6″
Body Main 12″Clone Urethane
Body,Middle 12″Clone Urethane
Valve Apex 1-1/2″Clone Urethane
Elbow Grooved End 90 Polyurethane
Liner，Feed Urethane Twin Cone 4″
Cone Twin 4″Urethane 1/2″Apex
Gauge 0-60 Psi/0-400 Kpa 2-1/2″1/4 Npt Lm
Coupling Grooved End Snap T-Gasket 2″300 Psi
Coupling Grooved End Snap T-Gasket 2-1/2″300 Psi
Coupling Grooved End Bolt T-Gasket 8″800 Psi
4“Cone Assembly
4“Hydrocyclone Body
Thread On Cone Tip
Drop In Apex
Triangular Nut
10“ Desander Cone
Upper Section
Upper Band
Middle Section
Lower Band
Lower Section
Apex Holder

• Hydro-Cyclones made of Polyurethane(PU) Cyclones
• Hydro-Cyclones made of Polyurethane(PU) Cyclones with Ceramic Lining
• Hydro-Cyclones made of High Molecular Material Cyclones
• Hydro-Cyclones made of Iron Cyclones with Polyurethane(PU) Lining
• Hydro-Cyclones made of Iron Cyclones with Ceramic Lining

• Hydro-Cyclones for Solids and Liquid Separation for Mud Recycling System for Oil and Gas Drilling

There is Desander Cyclones and Desilter Cyclones on Mud Recycling System, they can remove the useless solids phase from the high valued drilling mud step by step.

• Hydro-Cyclones for Solids and Liquid Separation for Mud Recycler/Desanding Plant for Trenchless Industry

In Mud Recycler for Trenchless Project: HDD, TBM, Micro-tunneling and etc, Hydro-Cyclones can be install on the Mud Recycler, and separate the solids from the slurry, recovery the costly slurry.

• Hydro-Cyclones for Solids and Liquid Separation for Mining Industry

In Mining Industry, Hydro-Cyclones for Solids and Liquid Separation is Concentrate or tailings concentration and dehydration, cyclone combined with concentrator, filter, can efficiently complete the concentration and dehydration operations.  After the hydro-cyclone is concentrated and dehydrated, the increase of the bottom flow concentration increases the working efficiency of the filter. Sand and stone recovery, high mud sand washing recovery, fine sand recovery or Grinding and classification, cyclone and ball mill usually form a closed – circuit grinding and classification system.  Different Angle vertebrae, overflow pipe and sediment nozzle configurations can be selected according to the overflow situation and so on.