Vacuum Degasser for Mud Recycling System
The Vacuum Degasser is the equipment in the drilling fluid solids control system, usually installed after the Shale Shaker. The Vacuum Degasser and its supporting equipment are mainly used to separate the gas in the mud. ZHCQ series Vacuum Degasser is a kind of Vacuum Degasser developed by our company on the basis of referring to various types of Vacuum Degasser at home and abroad.
A new type of special equipment for processing gas immersion drilling fluid. Suitable for all kinds of mud purification systems
It can restore the specific gravity of the mud, stabilize the viscosity performance of the mud, and reduce the drilling cost has a very important role.
Structure of Vacuum Degasser for Mud Recycling System
Vacuum Degasser mounted on the base of the vacuum tank, electric true air pump, gas-water separator, electric control cabinet, explosion-proof motor, etc.
Working Principle of Vacuum Degasser for Mud Recycling System
ZHCQ series Vacuum Degasser for Mud Recycling System belongs to vacuum type degasser, that is to use the suction effect of vacuum pump,
A negative pressure area is created in the vacuum tank. Under the action of atmospheric pressure, the mud enters the rotary pump through the suction pipe.
The hollow shaft of the sub, and then from the window around the hollow shaft, it is thrown to the tank wall in a jet shape, due to the collision
And the role of the separation wheel, the drilling fluid is separated into thin layers, the bubbles immersed in the mud are broken, and the gas
The gas escapes through the suction of the vacuum pump and the separation of the gas-water separator, and the gas is discharged by the separator.
The gas pipe is discharged to the safe area, and the mud is discharged out of the tank by the impeller. Since the main motor starts first, The impeller connected to the motor rotates at a high speed, so the mud can only enter the tank from the suction pipe inside, will not be aspirated from the drain.
Technical Parameters of Vacuum Degasser for Mud Recycling System
Model:ZHCQ270/ZHCQ360
Tank Diameter:6 inch/8 inch
Capacity:270m3/h -360m3/h
Vacuum Degree:0.03-0.05Mpa/0.04-0.065Mpa
Handing Efficiency: more than 95%
Main Motor:22kw(30hp)/37kw(50hp)
Pump Motor:5.5kw(7.5hp)
Rotation Speed:700/860Rpm
Voltage/ Frequency:380V 50HZ/460V 60HZ or Customized.
Ex Standard: Ex d II BT4 IEC/EX/ATEX for option
Advantage of Vacuum Degasser for Mud Recycling System
- Vacuum Degasser with the help of the suction of the vacuum pump to make the mud enter the vacuum tank.
- Being drawn out of the vacuum tank, the vacuum pump of Vacuum Degasser plays two different roles here.
- During the working process, the water ring vacuum pump is always in an isothermal state, suitable for
- It is used for flammable and explosive gas suction, with reliable safety performance.
- The mud is shot to the four walls at high speed through the window of the rotor, and the air bubbles in the mud are broken Very thorough, good degassing effect.
- The main motor of Vacuum Degasser is biased, and the center of gravity of the whole machine is lowered.
- The belt drive Vacuum Degasser is adopted to avoid the complexity of the deceleration mechanism.
- The application of the gas-water separator will not cause water and gas to be discharged at the same time, so that the discharge
- The trachea is always open. In addition, water can be circulated to the vacuum pump, saving water.
- The suction pipe of Vacuum Degasser is inserted into the mud tank, and can be used as a Use a powerful agitator.
- Ultrasonic liquid level gauge accurately locates the liquid level to avoid high liquid level affect the processing effect.